SEND ENQUIRY
We offer a wide range of PP ball valves flange end, that are fabricated using the best grade materials. These ball valves are appreciated for their pressure resistant ability and high durability. Available in various sizes, thickness and lengths, these are designed as per the ANSI, BS & DIN standards.
Technical Specification:
| Construction | 3 piece design, 1 piece stem (spindle), full bore, Teflon seated |
| Standard | As per manufacturer's |
| Connection End | Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD. |
M.O.C. Available
• PP (Polypropylene)
• PVDF (Polyvinylidene Fluoride)
• HDPE (High Density Polypropylene)
| Size Inch | mm | OD | ID | L | T | H | H1 |
| 1 - 2 | 15 | 95 | 15 | 118 | 15 | 55 | 131 |
| 3 - 4 | 20 | 112 | 190 | 129 | 17 | 65 | 131 |
| 1 | 25 | 118 | 24 | 153 | 19 | 89 | 161 |
| 1 1/2 | 40 | 137 | 37 | 178 0 | 20 | 105 | 204 |
| 2 | 50 | 164 | 48.5 | 222 | 22 | 120 | 204 |
| 2 1/2 | 65 | 180 | 62.5 | 227 | 24 | 141 | 262 |
| 3 | 80 | 198 | 72 | 2540 | 25 | 150 | 262 |
| 4 | 100 | 225 | 99 | 295 | 26 | 172 | 312 |
| 6 | 150 | 302 | 150 | 431 | 31 | 245 | 305 |
| 8 | 200 | 360 | 200 | 462 | 32 | 285 | 305 |
| No. | Description | Material | Qty. |
| P1 | Body | PP / HDPE / PVDF | 1 |
| P2 | Side Piece/Connector | PP / HDPE / PVDF | 2 |
| P3 | Ball | PP / HDPE / PVDF | 1 |
| P4 | Stem/Spindle | M.S. / S.S. / PP / HDPE / PVDF Coated | 1 |
| P5 | Seat Ring | PTFE | 2 |
| P6 | Connector Seal | Neoprene Rubber / PTFE / PVC | 2 |
| P7 | Stem Seal Ring | PTFE | 1 |
| P8 | Stem O-Ring | Neoprene | 1 |
| P9 | Stud, Nut & Washer | M.S. (En8)/S.S. 316 | Req. |
| P10 | Nut Cap | PP | Req. |
| P11 | Handle | M.S. PP Coated | 1 |
| P12 | Handle Hex, Pin | M.S. (En8)/S.S. 316 | 1 |
| P13 | Handle Cap | PP | 1 |